Factors influencing TSH suppression efficacy in postoperative papillary thyroid carcinoma patients: a retrospective cohort study.

OBJECTIVES: While surgery plays a crucial role in treating papillary thyroid carcinoma (PTC), the potential effects of subsequent TSH suppression therapy on prognosis should not be overlooked. This study aims to investigate the factors that influence postoperative TSH suppression therapy in patients with PTC. METHODS: This study was a retrospective cohort study conducted at our hospital. It included 268 patients who underwent surgery and were pathologically diagnosed with PTC between February 2019 and February 2021. The selected patients received postoperative TSH suppression therapy. Based on the TSH level measured 12 months after surgery, the patients were divided into two groups: TSH level conforming group (n = 80) and non-conforming group (n = 188). We then compared the general clinical data, clinicopathological characteristics, preoperative laboratory test indicators, postoperative levothyroxine sodium tablet dosage, follow-up frequency, and thyroid function-related indicators between the two groups of patients. The correlation between the observed indicators and the success of TSH suppression therapy was further analyzed, leading to the identification of influencing factors for TSH suppression therapy. RESULTS: There were no statistically significant differences in general clinical data and clinicopathological characteristics between the two groups of patients (P > 0.05). The proportion of patients with preoperative TSH ≥ 2.0 mU/L was higher in the non-conforming group compared to the TSH level conforming group (P < 0.05), and the ROC curve analysis indicated that the area under the curve for the preoperative TSH index was 0.610 (P < 0.05). The proportion of patients in the TSH level conforming group who took oral levothyroxine sodium tablets at a dose of ≥ 1.4 µg/kg·d after surgery was higher (P < 0.05). The postoperative levels of FT3 and FT4 were higher in the TSH level conforming group (P < 0.05). The results of binary logistic regression analysis indicated that factors "Postoperative TSH level ≥ 2 mU/L", "Levothyroxine sodium tablet dose<1.4 µg/kg·d", and "Combined with Hashimoto thyroiditis" were significantly associated with an elevated risk of postoperative TSH levels failing to reach the target (P < 0.05). CONCLUSION: Optimal thyroid function in patients with PTC post-surgery is best achieved when adjusting the dose of levothyroxine sodium in a timely manner to reach the target TSH level during follow-up visits.

A GMP-compliant manufacturing method for Wharton's jelly-derived mesenchymal stromal cells.

BACKGROUND: Wharton's jelly-derived mesenchymal stem cells (WJ-MSCs) hold great therapeutic potential in regenerative medicine. Therefore, it is crucial to establish a Good Manufacturing Practice (GMP)-compliant methodology for the isolation and culture of WJ-MSCs. Through comprehensive research, encompassing laboratory-scale experiments to pilot-scale studies, we aimed to develop standardized protocols ensuring the high yield and quality of WJ-MSCs manufacturing. METHODS: Firstly, optimization of parameters for the enzymatic digestion method used to isolate WJ-MSCs was conducted. These parameters included enzyme concentrations, digestion times, seeding densities, and culture media. Additionally, a comparative analysis between the explant method and the enzymatic digestion method was performed. Subsequently, the consecutive passaging of WJ-MSCs, specifically up to passage 9, was evaluated using the optimized method. Finally, manufacturing processes were developed and scaled up, starting from laboratory-scale flask-based production and progressing to pilot-scale cell factory-based production. Furthermore, a stability study was carried out to assess the storage and use of drug products (DPs). RESULTS: The optimal parameters for the enzymatic digestion method were a concentration of 0.4 PZ U/mL Collagenase NB6 and a digestion time of 3 h, resulting in a higher yield of P0 WJ-MSCs. In addition, a positive correlation between the weight of umbilical cord tissue and the quantities of P0 WJ-MSCs has been observed. Evaluation of different concentrations of human platelet lysate revealed that 2% and 5% concentrations resulted in similar levels of cell expansion. Comparative analysis revealed that the enzymatic digestion method exhibited faster outgrowth of WJ-MSCs compared to the explant method during the initial passage. Passages 2 to 5 exhibited higher viability and proliferation ability throughout consecutive passaging. Moreover, scalable manufacturing processes from the laboratory scale to the pilot scale were successfully developed, ensuring the production of high-quality WJ-MSCs. Multiple freeze-thaw cycles of the DPs led to reduced cell viability and viable cell concentration. Subsequent thawing and dilution of the DPs resulted in a significant decrease in both metrics, especially when stored at 20-27 °C. CONCLUSION: This study offers valuable insights into optimizing the isolation and culture of WJ-MSCs. Our scalable manufacturing processes facilitate the large-scale production of high-quality WJ-MSCs. These findings contribute to the advancement of WJ-MSCs-based therapies in regenerative medicine.

[Study on changes of Styrax varieties].

Styrax is a commonly used imported traditional Chinese medicinal material in China. It was introduced to China in the Han Dynasty and was first described as a traditional Chinese medicine in Miscellaneous Records of Famous Physicians(Ming Yi Bie Lu). In this paper, by combing ancient and modern Chinese and foreign herbal medicine books and modern literature, combined with the results of field investigations on the origin of Styrax, the changes of Styrax involving the name, quality evaluation, origin, place of origin, and harvesting and processing were systematically verified. The results show that since ancient times, the origin and place of origin of Styrax have been unclear. The medical scientists of all dynasties in China have evaluated the quality of Styrax from four aspects: texture, viscosity, odor concentration, and color. The varieties of Styrax changed twice. The first change may have occurred during the Sui and Tang Dynasties, and the base changed from Styrax officinalis to Liquidambar orientalis. The second change was in modern times, and the base changed from L. orientalis to L. styraciflua. At the same time, the place of origin changed for the first time, from Turkey, Syria, and other countries in southern Asia Minor to Honduras, Guatemala, and other countries in Central America and southern North America. This paper studied the historical evolution of Styrax in terms of quality evaluation, origin, place of origin, character, and harvesting and processing. At the same time, it summarized the application of Styrax in the western countries, which can provide a historical basis for the further development and utilization of Styrax.

Antifreezing, Antidrying, and Conductive Hydrogels for Electronic Skin Applications at Ultralow Temperatures.

Although conductive hydrogel-based flexible electronic devices have superb flexibility and high conductivities, they tend to malfunction in dry or frigid areas. Herein, an ultralow-temperature tolerant, antidrying, and conductive composite hydrogel is designed for electronic skin applications on the basis of the synergy of double-cross-linked polymer networks, Hofmeister effect, and electrostatic interaction and fabricated by in situ free radical polymerization of 2-acrylamido-2-methyl-1-propanesulfonic acid and acrylic acid in the presence of poly(vinyl alcohol) and conductive MXene sheets, followed by impregnation with LiCl. Thanks to the synergy of LiCl and the charged polar terminal groups of the synthesized polymers, the composite hydrogel can not only bear an ultralow temperature of -80 °C without freezing but also maintain its original mass. Meanwhile, the resultant hydrogel possesses satisfactory self-regeneration ability benefiting from the moisturizing effect of LiCl. The conductive network of MXene sheets greatly improves the ionic conductivity of the hydrogel at low temperatures, exhibiting an ionic conductivity of 1.4 S m-1 at -80 °C. Furthermore, the electronic skin assembled by the multifunctional hydrogel is efficient in monitoring human motions at -80 °C. The antifreezing and antidrying features along with favorable ionic conductivity, high tensile strength, and outstanding flexibility make the composite hydrogel promising for applications in frigid and dry regions.

Constructing Dynamic Anode/Electrolyte Interfaces Coupled with Regulated Solvation Structures for Long-Term and Highly Reversible Zinc Metal Anodes.

Aqueous zinc ion batteries (AZIBs) show a great potential for next-generation energy storage due to their high safety and high energy density. However, the severe side reactions of zinc negative electrode largely hinder the further application of AZIBs. Herein, trace tris(hydroxymethyl)aminomethane (Tris) additive with rich lone-pair-electrons and zincophilic sites is firstly introduced to achieve long-term and highly reversible Zn plating/stripping. Specifically, Tris not only regulates the solvation structure of Zn2+, but is also adsorbed vertically on the Zn anode surface with a changed coordination intensity during the plating/stripping process of Zn to generate an in situ dynamic adsorption layer for the first time. The dynamic adsorption layer could successively attract the solvated Zn2+ and then promote the de-solvation of the solvated Zn2+ owing to the orientation polarization with regularly-changed applied electric field, the volume rejection effect, and strong intermolecular force towards H2O of the vertically-adsorbed Tris. Therefore, an improved Zn2+-transport kinetics as well as the inhibition of side reactions of Zn anode are successfully realized. Accordingly, the Zn||Zn symmetric cell provides an ultra-long cycle life of 2600 h. Furthermore, the Zn||MnO2 full cell with Tris could demonstrate a high capacity and structural stability for practical applications.

Anisotropic MXene/Poly(vinyl alcohol) Composite Hydrogels with Vertically Oriented Channels and Modulated Surface Topography for Efficient Solar-Driven Water Evaporation and Purification.

Hierarchical structure and surface topography play pivotal roles in developing high-performance solar-driven evaporators for clean water production; however, there exists a notable gap in research addressing simultaneous modulation of internal microstructure and surface topography in hydrogels to enhance both solar steam generation performance and desalination efficiency. Herein, anisotropic poly(vinyl alcohol)/MXene composite hydrogels for efficient solar-driven water evaporation and wastewater purification are fabricated using a template-assisted directional freezing approach followed by precise surface wettability modulation. The resultant composite hydrogels exhibit vertically oriented channels that ensure fast water supply during evaporation, and their poly(vinyl alcohol) skeletons can reduce the vaporization enthalpy of the water in the hydrogels. The incorporation of MXene sheets enables efficient solar light absorption and solar-thermal conversion while providing structural reinforcement to the hydrogels. More importantly, the as-created undulating solar-thermal surface, featuring modulated hydrophilic troughs and hydrophobic crests, significantly enhances solar-thermal conversion efficiency, thereby boosting solar evaporation performances. As a result, the fabricated hydrogel-based evaporator exhibits an impressive evaporation rate of 2.55 kg m-2 h-1 under 1 sun irradiation, coupled with long-term durability and desalination stability. Notably, the outstanding mechanical robustness of the hydrogel further enables high portability through a readily achievable process of reversible dehydration/hydration.

Multistimuli-Responsive Shape-Memory Composites with a Water-Assisted Self-Healing Function Based on Sodium Carboxymethyl Cellulose/Poly(vinyl alcohol)/MXene.

Recent advancements in artificial intelligence have propelled the development of shape-memory polymers (SMPs) with sophisticated, environment-sensitive capabilities. Despite the progress, most of the existing SMPs are limited to responding to a single stimulus and show poor functionality, which has severely hindered their future applications. Herein, we report a high-performance multistimuli-responsive shape-memory and self-healing composite film fabricated by embedding MXene nanosheets into a conventional shape-memory sodium carboxymethyl cellulose (CMC) and poly(vinyl alcohol) (PVA) matrix. The incorporation of photothermal MXene nanosheets not only enhances the composite films' mechanical strength but also provides efficient solar-thermal conversion and robust light-actuated shape-memory properties. The resultant composite films exhibit an exceptional shape-memory response to various stimuli including heat, light, and water. Meanwhile, the interfacial interactions can be modulated by adjusting the MXene content, thereby enabling precise manipulation of the shape-memory performance. Moreover, thanks to the intrinsic hydrophilicity of the components and the unique physically cross-linked network, the composite films also demonstrate an effective water-assisted self-healing capability with an impressive healing efficiency of 85.7%. This work offers insights into the development of multifunctional, multistimuli-responsive shape-memory composites, opening up new possibilities for future applications in smart technologies.

Artificial cavernosa-like tissue based on multibubble Matrigel and a human corpus cavernous fibroblast scaffold.

Ex vivo tissue culture of the human corpus cavernosum (CC) can be used to explore the tissue structural changes and complex signaling networks. At present, artificial CC-like tissues based on acellular or three-dimensional (3D)-printed scaffolds are used to solve the scarcity of primary penis tissue samples. However, inconvenience and high costs limit the wide application of such methods. Here, we describe a simple, fast, and economical method of constructing artificial CC-like tissue. Human CC fibroblasts (FBs), endothelial cells (ECs), and smooth muscle cells (SMCs) were expanded in vitro and mixed with Matrigel in specific proportions. A large number of bubbles were formed in the mixture by vortexing combined with pipette blowing, creating a porous, spongy, and spatial structure. The CC FBs produced a variety of signaling factors, showed multidirectional differentiation potential, and grew in a 3D grid in Matrigel, which is necessary for CC-like tissue to maintain a porous structure as a cell scaffold. Within the CC-like tissue, ECs covered the surface of the lumen, and SMCs were located inside the trabeculae, similar to the structure of the primary CC. Various cell components remained stable for 3 days in vitro, but the EC content decreased on the 7th day. Wingless/integrated (WNT) signaling activation led to lumen atrophy and increased tissue fibrosis in CC-like tissue, inducing the same changes in characteristics as in the primary CC. This study describes a preparation method for human artificial CC-like tissue that may provide an improved experimental platform for exploring the function and structure of the CC and conducting drug screening for erectile dysfunction therapy.

High-Precision Printing of Flexible MXene Patterns for Dynamically Tunable Electromagnetic Interference Shielding Performance.

Smart electromagnetic interference (EMI) shielding materials are of great significance in coping with the dynamic performance demands of cutting-edge electronic devices. However, smart EMI shielding materials are still in their infancy and face a variety of challenges (e.g., large thickness, limited tunable range, poor reversibility, and unclear mechanisms). Here, we report a method for controllable shielding electromagnetic (EM) waves through subwavelength structure changes regulated by the customized structure via a direct printing route. The highly conductive MXene ink is regulated with metal ions (Al3+ ions), giving superb metallic conductivity (∼5000 S cm-1) for the printed lines without an annealing treatment. The reversible tunability of EMI shielding effectiveness (SE) ranging from 8.2 dB ("off" state) to 34 dB ("on" state) is realized through the controllable modulation of subwavelength structure driven by stress. This work provides a feasible strategy to develop intelligent shielding materials and EM devices.

Highly Aligned Graphene Aerogels for Multifunctional Composites.

Stemming from the unique in-plane honeycomb lattice structure and the sp2 hybridized carbon atoms bonded by exceptionally strong carbon-carbon bonds, graphene exhibits remarkable anisotropic electrical, mechanical, and thermal properties. To maximize the utilization of graphene's in-plane properties, pre-constructed and aligned structures, such as oriented aerogels, films, and fibers, have been designed. The unique combination of aligned structure, high surface area, excellent electrical conductivity, mechanical stability, thermal conductivity, and porous nature of highly aligned graphene aerogels allows for tailored and enhanced performance in specific directions, enabling advancements in diverse fields. This review provides a comprehensive overview of recent advances in highly aligned graphene aerogels and their composites. It highlights the fabrication methods of aligned graphene aerogels and the optimization of alignment which can be estimated both qualitatively and quantitatively. The oriented scaffolds endow graphene aerogels and their composites with anisotropic properties, showing enhanced electrical, mechanical, and thermal properties along the alignment at the sacrifice of the perpendicular direction. This review showcases remarkable properties and applications of aligned graphene aerogels and their composites, such as their suitability for electronics, environmental applications, thermal management, and energy storage. Challenges and potential opportunities are proposed to offer new insights into prospects of this material.

Well-designed lamellar reduced graphene oxide-based foam for high-performance solar-driven water purification.

Although solar steam generation is promising for seawater desalination, it is less effective in purifying wastewater with both salt/heavy metal ions and organic contaminants. It is thus imperative to develop multifunctional integrated solar-driven water purification systems with high solar-thermal evaporation and photocatalytic degradation efficiencies. Herein, a lamellar reduced graphene oxide (L-RGO) foam with the vertical lamellar structure is fabricated by bidirectional-freezing, lyophilization, and slight chemical reduction for water purification. The unique vertical lamellar structure not only accelerates upward transport of water for facilitating water evaporation but also endows the L-RGO foam with superb high elasticity for tuning the interlayer distance and varying interactions between the oxygen-containing groups and water molecules to adjust water energy state. As a result, the L-RGO foam achieves a superb water evaporation rate of 2.40 kg m-2 h-1 along with an energy efficiency of 95.3 % under the compressive strain of 44.7 % under 1-sun irradiation. Equally importantly, the decoration of L-RGO foam with polypyrrole is capable of efficiently degrading organic pollutants while retaining high solar steam generation performances, exhibiting great potential in the comprehensive treatment of various water sources for relieving freshwater crisis.

Biphasic GaIn Alloy Constructed Stable Percolation Network in Polymer Composites over Ultrabroad Temperature Region.

Flexible and adaptable polymer composites with high-performance reliability over wide temperature range are imperative for various applications. However, the distinct filler-matrix thermomechanical behaviors often cause severe structure damage and performance degradation upon large thermal shock. To address this issue, a general strategy is proposed to construct leakage-free, self-adaptive, stable percolation networks in polymer composites over wide temperature (77-473 K) with biphasic Ga35In65 alloy. The in situ micro-CT technology, for the first time, reveals the conformable phase transitions of Ga35In65 alloys in the polymer matrix that help repair the disruptive conductive networks over large temperature variations. The cryo-expanded Ga compensates the disruptive carbon networks at low temperatures, and flowable Ga and melted In at high temperatures conformably fill and repair the deboned interfaces and yielded crevices. As a proof-of-concept, this temperature-resistant composite demonstrates superb electrical conductivity and electromagnetic interference shielding properties and stability even after a large temperature shock (ΔT = 396 K). Furthermore, the superiority of the construction of temperature self-adaptive networks within the composite enables them for additive manufacturing of application-oriented components. This work offers helpful inspiration for developing high-performance polymer composites for extreme-temperature applications.

A novel magnetic Ti-MOF/chitosan composite for efficient adsorption of Pb(II) from aqueous solutions: Synthesis and investigation.

In this investigation, a composite material comprising Ti-MOF and chitosan, denoted as BD-MOF(Ti)@CS/Fe3O4, was successfully designed for the efficient adsorption of Pb(II) from aqueous solutions. A comprehensive array of characterization techniques, including SEM, XRD, BET, FT-IR, and XPS, were meticulously employed to scrutinize the structural attributes and morphological features of the Pb(II) adsorbent. Notably, the material exhibits adaptability to a broad pH range, with adsorption efficiency reaching 99 % between pH 3 and 6. Kinetic studies reveal that the adsorption process of Pb(II) by BD-MOF(Ti)@CS/Fe3O4 adheres closely to a pseudo-second-order kinetic model. Impressively, within a short duration of 40 min, the adsorption efficiency can reach 85 %. Furthermore, the adsorption isotherm aligns with the Hill isotherm model, signifying cooperative adsorption. This observation underscores the synergistic interplay among the functional groups on the surface of BD-MOF(Ti)@CS/Fe3O4 in capturing Pb(II). As per the Hill model, the theoretical maximum capacity was an impressive 944.9 mg/g. Thermodynamic assessments suggested that the adsorption process was spontaneous, entropy increasing and exothermic. Even in the presence of various interfering ions, BD-MOF(Ti)@CS/Fe3O4 exhibited robust adsorption performance, thereby affirming its utility in complex environments. Moreover, the material demonstrates noteworthy reusability, sustaining effective Pb(II) removal across five consecutive cycles in aqueous solutions.

Chinese patent medicine as a complementary and alternative therapy for type 2 diabetes mellitus: A scoping review.

OBJECTIVE: This scoping review aims to document Chinese Patent Medicines (CPMs) for Type 2 Diabetes Mellitus, explore whether CPMs can improve patients' health outcomes, and set priorities in addressing research gaps in this area. METHODS: Following the framework of PRISMA-SCr, we proposed the research questions based on PICOS principle, and searched the CPMs for T2DM from three drug lists, followed by a systematic search of the literature in eight databases from their inception to June 22, 2023. Then, we developed the eligibility criteria and systematically reviewed the relevant studies, retained the studies about CPMs for T2DM, extracted the related data, and identified the differences across studies in structured charts. RESULTS: A total of 25 types of CPMs were extracted from the three drug lists. Radix astragali appeared most frequently (19 times) among the herbal medicinal ingredients of CPMs. A total of 449 articles were included in the full-paper analysis ultimately, all of which were about 20 types of CPMs, and there were no related reports on the remaining five CPMs. Except about a quarter (25.39 %, 114/449) using CPMs alone, the remaining studies all involved the combination with oral hypoglycemics for T2DM. Biguanides are the most common drugs used in combination with CPMs (50.14 %, 168/335). Fasting plasma glucose (FPG) is the most frequently reported outcomes in efficacy evaluation (82.41 %, 370/449). CONCLUSION: There are a total of 25 types of CPMs currently available for T2DM patients. However, the volume of related evidence on these CPMs varies. It is necessary to standardize the combined use of CPMs and conventional medicine and select appropriate outcomes in future studies.

Ameliorative Role of Mitochondrial Therapy in Cognitive Function of Vascular Dementia Mice.

BACKGROUND: Mitochondrial dysfunction plays a vital role in the progression of vascular dementia (VaD). We hypothesized that transfer of exogenous mitochondria might be a beneficial strategy for VaD treatment. OBJECTIVE: The study was aimed to investigate the role of mitochondrial therapy in cognitive function of VaD. METHODS: The activity and integrity of isolated mitochondria were detected using MitoTracker and Janus Green B staining assays. After VaD mice were intravenously injected with exogenous mitochondria, Morris water maze and passive avoidance tests were used to detect cognitive function of VaD mice. Haematoxylin and eosin, Nissl, TUNEL, and Golgi staining assays were utilized to measure neuronal and synaptic injury in the hippocampus of VaD mice. Detection kits were performed to detect mitochondrial membrane potential (ΔΨ), SOD activity and the levels of ATP, ROS, and MDA in the brains of VaD mice. RESULTS: The results showed that isolated mitochondria were intact and active. Mitochondrial therapy could ameliorate cognitive performance of VaD mice. Additionally, mitochondrial administration could attenuate hippocampal neuronal and synaptic injury, improve mitochondrial ΔΨ, ATP level and SOD activity, and reduce ROS and MDA levels in the brains of VaD mice. CONCLUSIONS: The study reports profitable effect of mitochondrial therapy against cognitive impairment of VaD, making mitochondrial treatment become a promising therapeutic strategy for VaD.

First screening for tick-borne pathogens in Chinese Milu deer (Elaphurus davidianus).

Ticks are primary vectors for many tick-borne pathogens (TBPs) and pose a serious threat to veterinary and public health. Information on the presence of TBPs in Chinese Milu deer (Elaphurus davidianus) is limited. In this study, a total of 102 Chinese Milu deer blood samples were examined for Anaplasma spp., Theileria spp., Babesia spp., Rickettsia spp., and Borrelia spp., and three TBPs were identified: Anaplasma phagocytophilum (48; 47.1 %), Candidatus Anaplasma boleense (47; 46.1%), and Theileria capreoli (8; 7.8 %). Genetic and phylogenetic analysis of the 16S rRNA and 18S rRNA confirmed their identity with corresponding TBPs. To our knowledge, this is the first report on Candidatus A. boleense and T. capreoli detection in Chinese Milu deer. A high prevalence of A. phagocytophilum with veterinary and medical significance was identified in endangered Chinese Milu deer, which could act as potential zoonotic reservoirs. The identification of the TBPs in Chinese Milu deer provides useful information for the prevention and control of tick-borne diseases.

Decoding the Cellular Trafficking of Prion-like Proteins in Neurodegenerative Diseases.

The accumulation and spread of prion-like proteins is a key feature of neurodegenerative diseases (NDs) such as Alzheimer's disease, Parkinson's disease, or Amyotrophic Lateral Sclerosis. In a process known as 'seeding', prion-like proteins such as amyloid beta, microtubule-associated protein tau, α-synuclein, silence superoxide dismutase 1, or transactive response DNA-binding protein 43 kDa, propagate their misfolded conformations by transforming their respective soluble monomers into fibrils. Cellular and molecular evidence of prion-like propagation in NDs, the clinical relevance of their 'seeding' capacities, and their levels of contribution towards disease progression have been intensively studied over recent years. This review unpacks the cyclic prion-like propagation in cells including factors of aggregate internalization, endo-lysosomal leaking, aggregate degradation, and secretion. Debates on the importance of the role of prion-like protein aggregates in NDs, whether causal or consequent, are also discussed. Applications lead to a greater understanding of ND pathogenesis and increased potential for therapeutic strategies.

Characterization and risk assessment of microplastics in laver from the Yueqing Bay.

Microplastics (MPs) pollution is regarded as a global challenge for ocean. As an important food source of human, macroalgae could suffer MP pollution and transmit MPs into human via food web. However, few studies have revealed the relationship of MP pollution between macroalgae and its habitat. In order to evaluate the trapping and accumulation of MPs in macroalgae and surface water, the present study investigated MP pollution in a typical aquaculture macroalgae species, laver (Porphyra haitanensis) in the Yueqing Bay. The results indicated MP abundance in laver (1.45 ± 0.26 items/g) was at a medium level while MP abundance in surface water (0.21 ± 0.15 item/m3) was at a relatively low level worldwide. Distribution trend and characteristics of MPs in laver and surface water showed highly similarity. Besides, heavy metal elements (Fe and Zr) were detected on the surface of MPs trapped by laver. Pollution load index (PLI) in surface water of the whole bay was low, indicating MP pollution was not serious in the Yueqing Bay. Due to the discharging of domestic sewage in recent years, fiber-shaped, textile MPs accounted for most in laver and surface water of the Yueqing Bay. These results indicated that MPs in surface water could be trapped by P. haitanensis, thus macroalgae cultivation might be a potential way to alleviate seawater MP pollution in the nearshore areas.

Self-Powered and Self-Healable Extraocular-Muscle-Like Actuator Based on Dielectric Elastomer Actuator and Triboelectric Nanogenerator.

Although dielectric elastomer actuators (DEAs) are promising artificial muscles for use as visual prostheses in patients with oculomotor nerve palsy (ONP), high driving voltage coupled with vulnerable compliant electrodes limits their safe long-term service. Herein, a self-healable polydimethylsiloxane compliant electrode based on reversible imine bonds and hydrogen bonds is prepared and coated on an acrylic ester film to develop a self-healable DEA (SDEA), followed by actuation with a high-output triboelectric nanogenerator (TENG) to construct a self-powered DEA (TENG-SDEA). Under 135.9 kV mm-1 , the SDEA exhibits an elevated actuated strain of 50.6%, comparable to the actuation under DC power. Moreover, the mechanically damaged TENG-SDEA displays a self-healing efficiency of over 90% for 10 cycles. The TENG ensures the safe using of TENG-SDEAs and an extraocular-muscle-like actuator with oriented motion ability integrated by several TENG-SDEAs is constructed. Additionally, the SDEA is directly used as a flexible capacitive sensor for real-time monitoring of the patient's muscle movement. Accordingly, a medical aid system based on a conjunction of the extraocular-muscle-like actuator and a flexible capacitive sensor is manufactured to help the patients suffering from ONP with physical rehabilitation and treatment.

The Influence of Preoperative Waiting Time on Anxiety and Pain Levels in Outpatient Surgery for Breast Diseases.

OBJECTIVE: This study aims to examine the effects of different preoperative waiting times on anxiety and pain levels in patients undergoing outpatient surgery for breast diseases, providing insights for clinical interventions during the perioperative phase. METHODS: Patients who underwent outpatient surgery at a hospital breast center in Ningbo between January 2021 and December 2021 were selected. Their anxiety levels at the time when they entered the preoperative preparation room and when they ended the postoperative waiting period for the rapid frozen section procedure were assessed using the State Anxiety Inventory (S-AI) questionnaire, and their pain levels at the end of the postoperative waiting period were assessed using the short-form McGill Pain Questionnaire. The patients enrolled were divided into 3 groups according to the preoperative waiting time: <2 hours (T1 group), 2 to 4 hours (T2 group), and >4 hours (T3 group); there were 150 patients in each group, and the anxiety and pain levels were compared between the groups. RESULTS: At the time of entering the preoperative preparation room, patients' S-AI score T1 = T2 ( P > 0.05), both T1 and T2 < T3 ( P < 0.05); however, at the time of the postoperative waiting period, patients' S-AI score was T1 < T2 < T3 ( P < 0.05), and the postoperative waiting period patients' short-form McGill Pain Questionnaire scores were T1 = T2 < T3 ( P < 0.05). CONCLUSIONS: The perioperative anxiety and pain levels of patients undergoing outpatient breast surgery increased with the prolongation of preoperative waiting time; 4 hours was the critical time point for change, after which the anxiety and pain levels of patients increased significantly.